LED Kerze / LED Candle

ab 99,90 €

inkl. MwSt., zzgl. Versand
Lieferzeit: 3-6 Tag(e)

Beschreibung

Der Bausatz erlaubt den Aufbau einer 400 mm x 30 mm großen Kerze mit beidseitiger LED Matrix (insgesamt 288 LEDs). Auf dieser wird eine realistisch wirkende Flamme dargestellt. Die Stromversorgung erfolgt über einen 800 mAh Lithium Polymer Akku, welcher sich im Lieferumfang befindet.

Die Platine kann auch auf 300 mm bzw. 200 mm Höhe gekürzt werden, ohne dass die Funktion beeinträchtigt wird.


Lieferumfang:

  1. Platine (matt schwarz, 400mm x 30mm x 3,2mm)
  2. Atmega mit passender Firmware
  3. Hochwertiger Standfuß aus Eichenholz (andere Holzarten gerne auf Anfrage)
  4. Akku
  5. Bauteile und auf Wunsch auch 300 warmweißen LEDs


Eine bebilderte Aufbauanleitung wird als PDF-Dabei zur Verfügung gestellt.

Hier geht es zur Lötanleitung. Die Firmware kann hier geladen werden. In der Zip-Datei befinden sich zwei Hex-Dateien. Die Firmware mit Dimmung funktioniert nur bei Version 2.


NEU! Ab sofort ist Version 2 erhältlich.

Version 2 kommt mit einem 2500 mAh Akku, welcher direkt in der Platine und nicht im Sockel sitzt. Die Kerzenflamme lässt sich zusätzlich auf Tastendruck in fünf Helligkeitsstufen dimmen. Es gibt einen zusätzlichen Taster an der Platinenseite kurz über dem Sockel. Die Ladebuchse ist als USB Micro ausgeführt. Der Standfuß ist rund und kann in verschiedenen Holzarten hergestellt werden. (Bitte vorher anfragen, welche Holzarten verfügbar sind). Die Platine wird von einem 38 mm Plexiglasrohr umhüllt.


Versandkosten ins Ausland werden individuell berechnet. Sprechen Sie uns an!


For our english customers

Build your own LED candle! The kit includes the PCB, all parts and (if you want) also 300 warm white LEDs. The microcontroller comes with installed firmware. The soldering instruction is available here: soldering instruction. You can also buy fully assembled PCBs!!!

The PCB size is 400 mm x 30 mm. All parts are in 0603 size. The flame animation will be shown on two LED matrices (front and back) with 288 LEDs in total (2x 16x9 LEDs) There are two versions available: Version 1 simply shows you the animated flame. The animation is endless. You can start the candle by pressing the button and turn it off by pressing the button for more than 3 seconds. The bottom stand is a wooden block of 10cm x 10cm x 2cm made of oak. The battery has a capacity of 800mAh and will last around 4-5 hours.


In Version 2 you can set the brightness of the flame in five different Levels. The PCB is encapsulated with a 38mm Plexiglas tube. The battery has a capacity of 2500mAh and will last upto more than 24h depending on the brightness of the animation. The stand has a round shape and can be produced in many different wooden materials (apple, pear, walnut, beech, oak, lime). The battery can be recharged using a USB micro power adapter (USB mini in version 1).


The shipping (worldwide) costs depend on your destination. Just write a mail and we'll send you all necessary information.